Sealed AGM Motorcycle Battery 12V 14Ah Maintenance Free

Product Description: Our Dimension on This Battery

Specifications: - Model Number: YB14-BS (YTX14AH-BS; YB14A-A1; YB14A-A2; YB14-B2) - Voltage: 12V - Capacity: 14Ah - SAE Dimensions: 5-5/16" x 3-1/2" x 6-15/16" (±1/16") - Metric Dimensions: 134mm x 89mm x 166mm (±2mm) - Cold Cranking Amps (C.C.A.): 210

What Is Cold Cranking Amp (C.C.A)? Essentially, Cold Cranking Amps is an industry value to rate a battery's ability to start an engine in cold temperatures. The numerical value refers to the number of amps a battery can produce, and sustain for 30 seconds, at a temperature of 0 degrees Fahrenheit.

Maintenance & Storage: A battery only requires a little monthly maintenance to perform perfectly. Keep the battery charged to 100%, recharging when the lights dim, the starter sounds weak, or the battery hasn't been used in more than two weeks. Follow the simple battery storage check list below once a month: - Check voltage every 3 months (or more frequently if stored at higher temperatures as high temperatures cause higher self-discharge rates) - Periodically: Keep top of battery clean, check cables, clamps, and case for obvious damage or loose connections, clean terminals and connectors as necessary

Once activated, the battery is permanently sealed and must never be opened. There is no need to add water to AGM GEL batteries. Adding water to AGM GEL batteries will result in irreparable damage to the battery or the vehicle.

Features: - Best suited for Deep cycle applications and their life is generally in the 500 to 5000 cycles range - Maintenance free - Spill proof - Minimal corrosion, therefore compatible with sensitive electronic equipment - Rugged and vibration-resistant - Very safe as less risk of sulphuric acid burns - Lowest cost-per-month (cost / months of life) - Lowest cost-per-cycle (cost / life cycles) - Factory Activated, Fully Charged, No Water or Charge Needed, Ready to Use

Polarity: [ + - ], Cold Crank Amps(C.C.A): 210, Capacity: 14Ah Terminal Bolt and Nut Included Dimension(SAE): 134mm(L) x 89mm"(W) x 166mm"(H) {±2mm} Cross Reference Part Number: YB14-A2; YB14A-A1; YB14A-A2; YB14-B2; YTX14AH; YTX14AH-BS; UTX14AH-BS; CTX14AH-BS

product information: